If you are considering installing Electrical Surge Protection, there are several factors that you need to consider. High voltage can damage your machine. It’s similar to putting too much water pressure on a hose. The wire can overheat and even burn. The increase in voltage also wears out components over time. If you don’t have surge protection on your machine, consider using an adapter to reduce the voltage from your mains power source.
Why Are Surge Protectors Better Than Extension Cords
Another problem with battery surge protection is that some models are little more than glorified extension cords. Surges follow all kinds of wires into your home, including fax machines, answering machines, televisions, satellite systems, and computers. Since computers and televisions contain delicate electronic circuitry, even the most common appliances are at risk from power surges. They can fry your circuit boards and crash your hard drive, destroying your home entertainment system.
The types of surge protection devices are classified by their type and purpose. Some surge protectors use inductors to inhibit sudden changes in current. Other surge protection devices use MOVs and zener-type semiconductors. Many are available in multiple-element models. For example, the XRT surge protector protects against voltage spikes of up to 1,000 volts. A surge protection system can be an effective solution to this problem.
Large surges can damage electrical devices, and many devices are at risk of frying or melting without a surge protector. Even small surges can cause nuisance equipment to trip. Surges can result in voltage or current that can damage electrical appliances, and even a lightning strike can cause severe damage to electronic equipment. Lightning strokes are also a serious risk for electronic devices, as they can carry the electrical current into the facility via any conductive path.
What Is Surge Damage
A good surge protector should also be capable of taming big power spikes. But if you want to protect one or two sensitive electronic devices, you can install a single-circuit surge suppressor. The surge suppressors act like pressure-relief valves that divert excess voltage to the ground wire. In less than a nanosecond, the excess voltage is diverted to the ground wire. The flow of electricity resumes when the voltage levels return to normal.
A surge protector is only as good as its grounding. In an older house, outlets may not be properly grounded and wiring. A surge protector will have no effect if there is no grounding, and can’t provide a path for excess voltage to escape. Also, don’t plug high-voltage appliances into power strips. This can cause them to overheat and create an electrical fire. When buying surge protection, always remember that surges can occur at any time, and you should purchase surge protection for all of your valuable devices.
Besides whole-house surge suppressors, you can also get plug-in surge protectors outlet. These devices are a good choice if you are concerned about the size of your load center and lack of space. Surge suppressors will protect your appliances from surges, but they may not stop 15 percent of the excess voltage. Therefore, you may need a larger breaker panel to install a surge suppressor. The cost of these devices can range from about $70 to $350.
How To Choose A Surge Protector For A House
Before buying surge protectors, you need to decide which sensitive equipment in your home is most at risk. Do a walk-through inventory of all sensitive equipment in your home. Then, decide what type you want to protect. Consult with your local utility about proper selection, installation, and use of surge protection breaker. Look for surge protection with a clamping voltage of UL 330 volts, a surge current of 36,000 amps, and a joule rating of 360 joules.
If you have a short-circuit, you might want to install an over-current interrupter. This can help protect against surges caused by lightning. This is a more common problem than most people realize. A surge can destroy life-saving equipment. A surge can also cause structural damage. A surge protector can reduce the chance of fires in a structure. It is important to choose the right surge protection breaker for your home and property.
You might wonder why you need to install an Electrical Surge Protection in your home. In fact, there is no single answer to that question. But it is a good idea to consider all of your options and decide what is best for you. A home is a personal space, and electrical surges are dangerous to electronic equipment. Therefore, installing electrical surge protection in your home will protect your valuable equipment from harm. You might be surprised by how many surges happen each day and how much they affect your home.