Conduit Rewiring

conduit rewiring is often recommended for older homes. They are sometimes referred to as pipeline conduit, ductwork, or pipe conduit. Conduit is used to transmit electricity and communicate with house wiring systems. As houses get older, the amount of insulated conduit that is available per house can decrease. This results in greater resistance to heat and cold, which can make it harder to keep the home warm in the winter and keep it cool in the summer

What is Conduit Rewiring Used For

For houses that already built, conduit rewiring is usually a do-it-yourself job that does not require a lot of knowledge. If there are existing electrical wires on the house, all that needs to be done is to relocate the conduit that contains the electrical wires. In some cases, there are conduits that run through entire plaster walls. In these cases, it is necessary to remove the existing plaster wall and install new plaster wall before performing electrical rewiring. This is also an easy job to complete in most cases.

conduit rewiring

Process of Conduit Rewiring

  • It start by installing conduit that goes from exterior wall to exterior wall. The conduit is connected to wooden jacks that are installed at each end of the conduit. Jacks are then fastened into the walls using screws.
  • The next step involves cutting out holes in the exterior walls and attaching conduit to the holes. In many cases, holes may already be there. Once the holes are dug, conduit is added until the holes are filled in. It is important to have drywall that is flat and free of lumps. Otherwise, the holes may widen too much and form air pockets between the conduit and the drywall. In this case, it may be necessary to reinstall drywall where it was removed.
  • While conduit rewiring is not the only option for updating a home’s electrical system, it is one of the most popular. The process can take as little as two or three hours, depending on how long does it take rewire a house . In addition to saving homeowners money, conduit rewiring prevents electrical problems that can arise from worn cables. When appliances in the home have trouble working because of worn cables, it is time to replace them. This problem is likely to cause additional expense because of having to hire a professional

Benefits of Conduit Rewiring at Home

It makes the electrical wiring of a house more energy-efficient. The reason is that the home will run more efficiently when the house’s wiring system is updated. Older houses, especially, were built with wiring that does not use choke tubes, which conduct electricity efficiently and help prevent shocks. These pipes were constructed with a copper core, but over time the copper can deteriorate. A newer home should have the copper core replaced with an aluminum core.

Conduit rewiring is an easy way to make a house more energy efficient. If you are ready to update your home’s electrical system, contact a contractor who can give you advice about how to do it. They will come to your home and give you an estimate on the cost of the project. Before you hire anyone to do this task, make sure they have experience doing conduit installations. Also, find out what kind of permits the contractor needs to perform the job. If the home is still under construction, he may need to get a building permit before beginning work